no longer welcome Posted May 20, 2009 Share Posted May 20, 2009 I leave my hookahs outside every night after smoking without touching them, i will take in the hose though. so today as usual i took my km in to clean it and peel back the foil and with no effort or reason my mini comes apart with the foil. Link to comment Share on other sites More sharing options...
joytron Posted May 20, 2009 Share Posted May 20, 2009 Another fallen soldieryour mini is in our hearts and prayers Link to comment Share on other sites More sharing options...
Stuie Posted May 20, 2009 Share Posted May 20, 2009 dang that sucks dude Link to comment Share on other sites More sharing options...
speel Posted May 20, 2009 Share Posted May 20, 2009 QUOTE (HookahJohn @ May 19 2009, 11:29 PM) <{POST_SNAPBACK}>I leave my hookahs outside every night after smoking without touching them, i will take in the hose though. so today as usual i took my km in to clean it and peel back the foil and with no effort or reason my mini comes apart with the foil.you didnt drop it or anything? Link to comment Share on other sites More sharing options...
TheShishaDoctor Posted May 20, 2009 Share Posted May 20, 2009 Did it get unusually cold that night? Perhaps the temperature dropped too fast. Link to comment Share on other sites More sharing options...
BLUE&GOLD Posted May 20, 2009 Share Posted May 20, 2009 fuuuuuuuuuuuuuuuuuuuuuuuuuuudge!! Now watch this Slide Fail and things will be Okayhttp://www.youtube.com/watch?v=bOXnxmlEkY0 Link to comment Share on other sites More sharing options...
MechAnt Posted May 20, 2009 Share Posted May 20, 2009 Oh noes!!!My mini is starting to do that as well. I'll post a pic tomorrow Link to comment Share on other sites More sharing options...
delSol_si Posted May 20, 2009 Share Posted May 20, 2009 QUOTE (TheShishaDoctor @ May 19 2009, 11:22 PM) <{POST_SNAPBACK}>Did it get unusually cold that night? Perhaps the temperature dropped too fast.That shouldn't matter. I don't have a mini, mine is just a small, but same concept. After I am done smoking and get ready to clean, the bowl is still scorching hot after I take the foil off. I put it straight into hot water for a few seconds, then straight to cold. Hasn't broken so far. Link to comment Share on other sites More sharing options...
chromecarz00 Posted May 20, 2009 Share Posted May 20, 2009 It was previously discussed that there may be hairline fractures which were not fixed but covered by the clay dude which became intensly fragile when fired and after multiple uses the clay expand/contract mechanism weakens it to the point of breaking...talk to eric hes more descriptive. Link to comment Share on other sites More sharing options...
thejoshman Posted May 20, 2009 Share Posted May 20, 2009 lol pwnt Link to comment Share on other sites More sharing options...
mattarios2 Posted May 20, 2009 Share Posted May 20, 2009 John, that is terrible! I feel for you man! She will be in our hearts! Link to comment Share on other sites More sharing options...
Capt. Morgan Posted May 20, 2009 Share Posted May 20, 2009 That sucks Link to comment Share on other sites More sharing options...
Click Posted May 20, 2009 Share Posted May 20, 2009 Sorry man. How many fallen mini's soldiers is that now? I'm counting like 4 or 5 down. Link to comment Share on other sites More sharing options...
HsK BATES Posted May 20, 2009 Share Posted May 20, 2009 i broke mine and gorilla glued it and it is perfect again. Link to comment Share on other sites More sharing options...
chromecarz00 Posted May 20, 2009 Share Posted May 20, 2009 QUOTE (HsK BATES @ May 20 2009, 11:45 AM) <{POST_SNAPBACK}>i broke mine and gorilla glued it and it is perfect again.Cant imagine whats coming out of that when heated... Link to comment Share on other sites More sharing options...
TheShishaDoctor Posted May 20, 2009 Share Posted May 20, 2009 QUOTE (chromecarz00 @ May 20 2009, 01:13 AM) <{POST_SNAPBACK}>It was previously discussed that there may be hairline fractures which were not fixed but covered by the clay dude which became intensly fragile when fired and after multiple uses the clay expand/contract mechanism weakens it to the point of breaking...talk to eric hes more descriptive.This is what I was getting at with the temperature change... any fractures will be exasperated by big temperature changes over time. Link to comment Share on other sites More sharing options...
HsK BATES Posted May 21, 2009 Share Posted May 21, 2009 QUOTE (chromecarz00 @ May 20 2009, 04:18 PM) <{POST_SNAPBACK}>QUOTE (HsK BATES @ May 20 2009, 11:45 AM) <{POST_SNAPBACK}>i broke mine and gorilla glued it and it is perfect again.Cant imagine whats coming out of that when heated...actually im pretty sure nothing is. it says it can be used on ceramics and no chemicals are given off when heated. i also glued it on the outside so i woudnt be inhaling squat. Link to comment Share on other sites More sharing options...
Zinite Posted May 21, 2009 Share Posted May 21, 2009 QUOTE (HsK BATES @ May 20 2009, 06:54 PM) <{POST_SNAPBACK}>QUOTE (chromecarz00 @ May 20 2009, 04:18 PM) <{POST_SNAPBACK}>QUOTE (HsK BATES @ May 20 2009, 11:45 AM) <{POST_SNAPBACK}>i broke mine and gorilla glued it and it is perfect again.Cant imagine whats coming out of that when heated...actually im pretty sure nothing is. it says it can be used on ceramics and no chemicals are given off when heated. i also glued it on the outside so i woudnt be inhaling squat.STOP using the bowl immediately.http://www.gorillaglue.com/firstaid/gorilla-glue.aspx [ - ] Can I heat the glue? Do not microwave or heat Gorilla Glue. [ - ] What are the first aid measures for inhalation? If inhalation causes physical discomfort move to fresh air. If breathing difficulty occurs or product is swallowed, seek medical attention. Individuals with chronic asthmatic conditions should consult a physician prior to using this product. Link to comment Share on other sites More sharing options...
jeremyk Posted May 21, 2009 Share Posted May 21, 2009 poor little guys Link to comment Share on other sites More sharing options...
chromecarz00 Posted May 21, 2009 Share Posted May 21, 2009 QUOTE (HsK BATES @ May 20 2009, 05:54 PM) <{POST_SNAPBACK}>QUOTE (chromecarz00 @ May 20 2009, 04:18 PM) <{POST_SNAPBACK}>QUOTE (HsK BATES @ May 20 2009, 11:45 AM) <{POST_SNAPBACK}>i broke mine and gorilla glued it and it is perfect again.Cant imagine whats coming out of that when heated...actually im pretty sure nothing is. it says it can be used on ceramics and no chemicals are given off when heated. i also glued it on the outside so i woudnt be inhaling squat.Even though you glued the outside, the vapor from the glue still floats up through the foil.And read the dude above me's post... Link to comment Share on other sites More sharing options...
HsK BATES Posted May 21, 2009 Share Posted May 21, 2009 i barely use the bowl any ways. its for my mini. i havnt noticed any change in taste or any discomfort. Link to comment Share on other sites More sharing options...
chromecarz00 Posted May 21, 2009 Share Posted May 21, 2009 QUOTE (HsK BATES @ May 20 2009, 06:43 PM) <{POST_SNAPBACK}>i barely use the bowl any ways. its for my mini. i havnt noticed any change in taste or any discomfort.Famous last words brotha. Just lookin out for ya Link to comment Share on other sites More sharing options...
Zinite Posted May 21, 2009 Share Posted May 21, 2009 QUOTE (HsK BATES @ May 20 2009, 07:43 PM) <{POST_SNAPBACK}>i barely use the bowl any ways. its for my mini. i havnt noticed any change in taste or any discomfort.Just because you can't taste it doesn't mean it's not there. Carbon monoxide poisoning for example...Do yourself a favor and toss the bowl. Link to comment Share on other sites More sharing options...
HsK BATES Posted May 21, 2009 Share Posted May 21, 2009 haha dont worry guys. i ordered a new tang small funnel yesterday to replace it. Link to comment Share on other sites More sharing options...
chromecarz00 Posted May 21, 2009 Share Posted May 21, 2009 Good man. HookahJohn whats the word? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now